How to Alter Skinny Fit Pants
Are you struggling with a pair of skinny fit pants that just don’t seem to fit quite right? Whether it’s a bit too tight around the waist or too snug in the legs, altering your skinny fit pants can be a game-changer. In this article, we’ll guide you through the process of how to alter skinny fit pants, ensuring a perfect fit that you’ll love wearing every day. From gathering the necessary materials to following step-by-step instructions, we’ve got you covered.
1. Gather Your Materials
Before you begin, make sure you have all the necessary materials for altering your skinny fit pants. You’ll need:
– A pair of matching thread and needles
– A pair of scissors
– A measuring tape
– A seam ripper
– A straight edge or ruler
– Pins
2. Determine the Area to Alter
Identify the specific areas of the pants that need adjusting. Common issues include:
– Waist: If the pants are too tight around the waist, you may need to let out the seams.
– Hips: If the pants are too tight around the hips, you may need to take in the seams.
– Length: If the pants are too long, you may need to shorten them.
3. Measure and Mark the Areas
Using your measuring tape, measure the areas where you need to make adjustments. Mark these measurements on the pants with a pen or a fabric marker.
4. Remove the Lining (If Necessary)
If your pants have a lining, remove it to make it easier to work with. Use the seam ripper to carefully remove the lining from the pants.
5. Cut the Seam
Using your scissors, carefully cut the seam of the pants along the marked line. Be sure to cut through both layers of fabric and the lining (if applicable).
6. Adjust the Seam
If you need to let out the waist, take out a few inches of the seam allowance on both sides. If you need to take in the hips, do the opposite by removing a small amount of fabric from the seam allowance on both sides.
7. Sew the Seam
Pin the fabric back together, right sides facing, and sew the seam using a straight stitch. Make sure to backstitch at the beginning and end of the seam to secure it.
8. Reattach the Lining (If Necessary)
If you removed the lining, now is the time to reattach it. Match the lining to the pants and sew it back into place using a zigzag stitch.
9. Hem the Pants (If Necessary)
If you shortened the pants, you may need to hem them. Fold the bottom edge of the pants up to the desired length and press it with an iron. Then, sew the hem using a straight stitch or a zigzag stitch.
10. Try on the Pants
Finally, try on the altered pants to ensure they fit perfectly. Make any additional adjustments if needed and enjoy your newly fitted skinny fit pants!
By following these simple steps, you can easily alter your skinny fit pants to achieve the perfect fit. Remember, a little bit of tailoring can go a long way in making your wardrobe more comfortable and stylish. Happy altering!
