How to Alter Jumpsuit for Men
Men’s fashion has evolved significantly over the years, and jumpsuits have emerged as a versatile and stylish option. However, off-the-rack jumpsuits may not always fit perfectly to every man’s body type. In this article, we will guide you through the process of how to alter jumpsuit for men to ensure a comfortable and flattering fit.
Step 1: Measure Your Jumpsuit
Before you begin altering your jumpsuit, it’s essential to take accurate measurements. Use a measuring tape to measure the following areas:
– Shoulder width: Measure from one shoulder tip to the other across the back.
– Waist: Measure around the narrowest part of your waist.
– Hip: Measure around the widest part of your hips.
– Length: Measure from the top of the jumpsuit to the hem.
Step 2: Identify the Areas to Alter
Once you have your measurements, compare them to the jumpsuit’s size chart. Identify the areas where the jumpsuit is too tight or too loose. Common alterations for men’s jumpsuits include:
– Adjusting the shoulder width
– Taking in or letting out the waist
– Shortening or lengthening the jumpsuit
– Altering the inseam
Step 3: Cut the Jumpsuit
Before making any cuts, ensure that the jumpsuit is laid flat on a hard surface. Mark the areas where you need to make cuts using a fabric chalk or pen. Use a pair of sharp fabric scissors to make clean cuts along the marked lines.
Step 4: Add or Remove Seam Allowance
If you are adding or removing fabric to adjust the jumpsuit, you’ll need to add or remove seam allowance. Seam allowance is the extra fabric that is added to the edges of a garment before sewing, allowing for a finished edge. Typically, seam allowance is 1/2 inch (1.27 cm) wide.
Step 5: Sew the Jumpsuit
After adding or removing the necessary fabric, pin the pieces together and sew along the marked lines. Use a matching thread to ensure the stitching blends in with the fabric. If you are unsure about your sewing skills, consider seeking assistance from a professional seamstress.
Step 6: Hem the Jumpsuit
Once the jumpsuit is altered and the seams are sewn, it’s time to hem the bottom edge. You can choose to create a straight hem, a rolled hem, or a pleated hem, depending on your preference. To hem the jumpsuit, fold the bottom edge up by the desired amount and press it with an iron. Then, pin the hem in place and sew it down using a zigzag stitch.
Step 7: Try on the Jumpsuit
After completing the alterations, try on the jumpsuit to ensure that it fits well and looks stylish. Make any final adjustments if necessary.
By following these steps, you can successfully alter a jumpsuit for men to achieve a perfect fit. With a bit of patience and attention to detail, you’ll have a jumpsuit that you can wear with confidence and style.
